Adjusting The Basic Position Of The Shift Lever - KTM 690 Enduro R 2019 Owner's Manual

16 TUNING THE ENGINE
16.4
214

Adjusting the basic position of the shift lever

401950-12
401951-10
–
1
Remove screw with the washers and take off shift
2
lever .
–
A
Clean gear teeth of the shift lever and shift shaft.
–
2
Mount shift lever on the shift shaft in the required position
and engage the gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any
other vehicle components during the shift procedure.
–
Mount and tighten screw
Guideline
Screw, shift M6
lever
1
with the washers.
14 Nm (10.3 lbf ft)
Loctite ® 243™