KTM 690 Enduro R 2019 Owner's Manual page 68

8 RIDING INSTRUCTIONS
Note
Engine failure Overheating damages the engine.
–
If the coolant temperature warning is displayed, stop immediately and take care not to endanger yourself or
other traffic participants in the process.
–
Allow the engine and cooling system to cool down.
–
Check and, if necessary, correct the coolant level on the cooling system while it is in a cooled state.
66
Info
If unusual noises arise during operation, stop immediately, switch off the engine, park the vehicle prop-
erly, and contact an authorized KTM workshop.
401950-11
–
Shift into a higher gear when conditions allow (incline, road
situation, etc.).
–
Release throttle while simultaneously pulling the clutch lever,
shift into the next gear, release the clutch lever, and open the
throttle.
Info
The gear positions can be seen in the figure. The neu-
tral or idle position is between the first and second
gears. First gear is used for starting off and for steep
inclines.
–
After reaching maximum speed by fully opening the throttle
grip, turn the throttle back so it is ¾ open. This will barely