14 ELECTRICAL SYSTEM
14.9
Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
188
S03303-12
Changing the headlight bulb
–
Position the headlight mask.
Info
Pay attention to routing of the brake line.
–
Mount and tighten screws
Guideline
Screw, headlight
mask
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
3
.
M5
5 Nm (3.7 lbf ft)
p. 192)
p. 186)