Advertisement
Under any circumstances, the brackets cannot touch with the inner surfaces of the
worktop after installation. (See picture above)
Cautions:
1.
The induction cooktop must be installed by a qualified personnel or technicians. Please
never conduct the operation by yourself.
2. The cooktop shall not be installed directly above a dishwasher, fridge, freezer, washing
machine or clothes dryer, as the humidity may damage the cooktop electronics.
3. The induction cooktop shall be installed such that better heat radiation can be ensured
to enhance its reliability.
4. The wall and induced heating zone above the table surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6. A steam cleaner is not to be used.
Connecting the Cooktop to the Mains Power Supply
This cooktop must be connected to the mains power supply only by a qualified person.
Before connecting the cooktop to the mains power supply, check that:
1.
The domestic wiring system is suitable for the power drawn by the cooktop.
2. The voltage corresponds to the value given in the rating plate.
3. The power supply cable sections can withstand the load specified on the rating plate.
4. To connect the cooktop to the mains power supply, do not use adapters, reducers or
branching devices, as they can cause overheating and fire.
5. The power supply cable must not touch any hot parts and must be positioned so that
its temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without
alterations.
Any alterations must be made only by a qualified electrician.
9
Advertisement
