Advertisement
The LED does not
come on when unit is
plugged in.
Some buttons can't
work, or the LED
display is not normal.
The Cooking Mode
Indicator comes on,
but heating does not
start.
Heating stops
suddenly during
operation and the
display flashes "u".
Heating zones of the
same side (Such as the
first and the second
zone) display "u".
Fan motor sounds
abnormal.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit yourself, to avoid any dangers and damages to the
induction cooktop.
Disposal
This marking indicates that this appliance should not be disposed with other
house-hold wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources.
User manual is subject to change without notice. For the latest version of your user manual, please visit
https://www.kogan.com/usermanuals/
The accessorial power
board and the display
board connected is
failure.
The accessorial power
board is damaged.
The display board is
damaged.
The display board is
damaged.
High temperature of
the cooktop.
There is something
wrong with the fan.
The power board is
damaged.
Pan type is wrong.
Pot diameter is too
small.
Cooker has
overheated.
The power board and
the display board
connected is failure.
The display board of
communicate part is
damaged.
The main board is
damaged.
The fan motor is
damaged.
24
and that outlet is
working.
Check the connection.
Replace the accessorial
power board.
Replace the display
board.
Replace the display
board.
Ambient temperature
may be too high. Air
intake or air vent may
be blocked.
Check whether the fan
runs smoothly if not,
replace the fan.
Replace the power
board.
Use the proper pot.
Unit is overheated.
Wait for temperature
to return to normal.
Push "ON/OFF" button
to restart unit.
Check the connection.
Replace the display
board.
Replace the power
board.
Replace the fan.
Pan detection
circuit is
damaged,
replace the
power board.
Advertisement
