If the total number of heating unit of the appliance you choose is not less than 4, then the
appliance can be connected directly to the mains by single-phase electric connection, as
shown below.
•
If the cable is damaged or to be replaced, the operation must be carried out by a
qualified technician with dedicated tools to avoid any accidents.
•
If the appliance is being connected directly to the mains, then an omnipolar circuit-
breaker must be installed with a minimum opening of 3mm between contacts.
•
The installer must ensure that the correct electrical connection has been made and
that it complies with safety regulations.
•
The cable must not be bent or compressed.
•
The cable must be checked regularly and replaced by authorised technicians.
The bottom surface and the power cord of the cooktop are not accessible after installation.
10