Advertisement
Touch timer control again, the "1" will flash.
Set the time by touching the slider control (e.g. 9),
now the timer you set is 96 minutes.
When the time is set, it will begin to count down
immediately. The display will show the remaining time
and the timer indicator will flash for 5 seconds.
When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
1.
Other cooking zone will keep operating if they are turned on previously.
2. The red dot next to power level indicator will illuminate indicating that zone is
selected.
The steps for setting more zones are like the steps of setting one zone;
When you set the time for several cooking zones simultaneously, decimal dots of the
relevant cooking zones are turned on. The minute display shows the minimum timer. The dot
of the corresponding zone flashes. As shown below:
Once the countdown timer expires, the corresponding
zone will switch off. Then it will show the new
minimum timer and the dot of corresponding zone will
flash.
Touch the heating zone selection control, the corresponding timer will be shown in the timer
indicator.
Set more zones:
(set to 15 minutes)
(set to 45 minutes)
minutes)
18
(set to
30
Advertisement
