Cochlear Baha Remote Control 2 Quick Manual page 3

Cochlear Baha Quick Guide
®
™
Cochlear Baha
™
Pairing with your Baha Sound Processor
Make sure the Remote Control 2 is fully charged and is turned ON.
A Switch off your Baha 4 Sound Processor:
By opening the
battery door and
removing the battery.
B Press the pairing button on the Remote Control
once using the tip of a pen or similar object.
D While pairing mode is active, you can switch on your sound processor in two different ways:
By inserting the
battery and closing
the battery door.
E Successful pairing will be indicated by an audible
melody played in the sound processor.
Not everyone with hearing loss is a candidate for a Baha. All surgical procedures include an element of risk, and it is impossible to guarantee success. For complete information
regarding the risks and benefits of a Baha procedure, please refer to the Instructions for use for the Baha implant available at www.Cochlear.com/US/BahaIndications
www.Cochlear.com/US
Cochlear Americas Cochlear Canada Inc.
13059 East Peakview Avenue 2500-120 Adelaide Street West
Centennial, CO 80111 USA Toronto, ON M5H 1T1 Canada
Telephone: 1 303 790 9010 Telephone: 1 416 972 5082
Support: 1 800 483 3123 Fax:
BUN300 ISS1 AUG14
©Cochlear Limited 2014. All rights reserved. Hear now. And always and other trademarks and registered
trademarks are the property of Cochlear Limited or Cochlear Bone Anchored Solutions AB. The names of
actual companies and products mentioned herein may be the trademarks of their respective owners.
Remote Control 2
®
1 416 972 5083
By pressing the
OR
"Off/volume down" button.
C The 'search' icon will display on the screen and
the Remote Control will now be in pairing mode
for 20 seconds.
Searching for both
hearing instruments.
By pressing the
"On/volume up" button.
OR
F Searching and connecting to the hearing instruments
Connected to left
hearing instrument
and searching for right
hearing instrument
Everyday