About The General Status Led - Magtek iDynamo 6 Installation And Operation Manual

3 - Operation
3.2

About the General Status LED

iDynamo 6's General Status LED (see section 1.3 About iDynamo 6 Components), provides feedback
to the operator and cardholder about the internal state of the device . Table 3-1 shows how to interpret
the flashing patterns of the General Status LED.
Table 3-1 - iDynamo 6 General Status LED Meanings
Color
Off Off
Green Solid
Green Solid
Amber Solid
Red Solid
Red Slow blink
Amber Slow blink
Green Slow blink
Green Fast flash
Green Solid on 2 seconds
Red Solid on 2 seconds
Blue Solid
iDynamo 6| Secure Card Reader Authenticator | Installation and Operation Manual
Flashing Pattern
Page 29 of 41 (D998200321-20)
Meaning
The device is not connected to a host and is not
receiving power.
If the device has no battery pack connected, it is
receiving power from the host, and is ready for the
host software to connect.
If a battery pack is connected, the battery pack is
not charging and its charge level is good.
The battery pack is not charging and its charge
level is fair. Charge when possible.
The battery pack is not charging and its charge
level is low. Charge immediately.
The battery pack is charging and its charge level is
low. Continue charging.
The battery pack is charging and its charge level is
fair. Continue charging if possible.
The battery pack is charging and its charge level is
high. Continue charging if desired. Transitions to
"not charging" indicator when full.
A cardholder's card is currently swiping in the
card path, or has just exited the card path but has
not yet been completely decoded by the device.
Device has successfully read a swiped card.
Device could not read a swiped card.
Host is loading firmware onto the device.