Magtek iDynamo 6 Installation And Operation Manual page 25

2 - Installation
a) Open the
MagTek Test
b) Press the
USB
Disconnected
c) Press the
Connect
d) Before testing a swipe, press the magnetic stripe card button in the top menu bar to open a menu,
and select
Set MSR On
iDynamo 6| Secure Card Reader Authenticator | Installation and Operation Manual
app on the Android host.
button in the top menu bar. The app should report the
.
button in the top menu bar.
to enable the magnetic stripe read head.
Page 25 of 41 (D998200321-20)
USB Connection State
should report
Connection State
is
.
Connected