How To Update The Firmware Program - Furuno FAR-3210 Instruction Manual

2. SETTING FOR SENSOR ADAPTER
2.3.3

How to update the firmware program

1. Delete the version number from the firmware binary file name.
Example 2450081-01010088_mc_cs_mainpg.bin
Program number
Example 2450081_mc_cs_mainpg.bin
2. Activate the maintenance program of the sensor adapter MC-3000S.
3. Activate the command prompt of Windows
4. Change the current directory to the directory where the firmware binary program
is saved.
In the example shown below, binary file is saved at
Note: Change the current directory to the one where the binary file is saved.
5. Enter "ftp 172.31.17.108" on the command prompt.
Confirm that "220-MC3000_CS_MAINTENANCE" is shown.
6. Enter the user name and password.
2-4
Version number
The command to change the current drive The command to change the current drive The command to change the current drive
The command to change the current directory The command to change the current directory The command to change the current directory
Enter the ftp command. Enter the ftp command. Enter the ftp command.
Enter the password. Enter the password. Enter the password.
Delete the version number from the file name.
®
.
Confirm that this massage appears . Confirm that this massage appears . Confirm that this massage appears .
Enter the user name. Enter the user name. Enter the user name.
.