Table of Contents
Advertisement
•
Username: admin
•
Password: admin
b. To access HPE Adaptive Rack Cooling System settings, select the configuration tab on the right
side of the screen. The admin password can be changed using the button on upper right side of
webpage. A few of the pertinent menu options for initial setup are:
•
TCP/IP settings allow selection of DHCP or setup of static IP address.
•
The HTTP menu enables or disables the web interface and HTTP/HTTPS selection.
•
Console settings allow disabling or enabling of SSH and Telnet console access.
•
The Users menu under Security allows the admin to change user access levels and passwords.
2. If the HPE Adaptive Rack Cooling System Ethernet interface is not enabled or the network port cannot
be accessed, access the HPE Adaptive Rack Cooling System serially through the mini-USB port on
the front of the CMC to set up the Ethernet port for web access. The CMC contains an internal serial to
USB adapter. To communicate to the unit, use the following settings with a serial console program.
•
Bits per Second: 9600 (needs verification)
•
Data bits: 8
•
Parity: none
•
Stop bits: 1
•
Flow control: none
•
Username (default): admin
•
Password (default): admin
Once logged in, you can enable the port and configure the IP information. Use the web interface to
complete further detailed setup.
a. The Network Configuration menu contains all the networking options. The Network Info menu
shows the current configuration.
Main Menu
> 1
Network Configuration <
2
Network Info Page
3
System Info Page
4
Console Commands
5
Set Configuration
b. The Network Configuration menu contains networking and security settings. The IPV4 menu
contains IP address settings and the enable/disable DHCP setting. The Security menu contains
settings to allow access to http, https, or both. After changes are made, use the G menu option to
return to the network configuration menu and reboot the HPE Adaptive Rack Cooling System.
Menu Network Configuration
> 1
IPv4 Configuration <
2
IPv6 Configuration
3
DNS Configuration
4
LDAP Configuration
Configuration
17
Advertisement
Table of Contents
