Table of Contents
Advertisement
Installation and operating instructions
QX³ series
You can make your MPP tracker settings here.
MPP-Tracker x:
Field
Location of the generator
Description of panel
Number of panels
Azimuth
Elevation
Generator rated power [Wp]
Expected annual normalized
power [kWh/kWp]
Search for global maximum
Yield per month as a
percentage
_____________________________________________________________________________________________
Q3 ENERGIE Installation and operating instructions QX³ series
Version 1.0, Stand 27.04.2015
Function
Enter a location designation here, e.g. "roof east, bottom"
Enter the name of the panels used here, e.g. "manufacturer
+ type"
Enter the number of panels connected in this string, e.g. "20"
Enter the alignment of your panels here.
0° south, 90° west ,180° north, 270° east
Enter the alignment of your panels here.
0° panel is horizontal
90° panel is vertical
Enter the rated power of the strings connected to the MPP
tracker. This value is used for projecting the yield.
Enter the value for your location here. This value is used for
projecting the yield.
Activates the search for the global maximum.
Under certain shading conditions (e.g. shadow cast by buildings or
trees) several local maximums could arise; whereby these are not
necessarily the global maximum.
The inverter automatically searches for the global maximum within a
defined set period of time.
Please note that during the time taken to search for the global
maximum, you cannot exploit the full possible performance of your
PV system for a very short time.
Enter the expected yield per month as a percentage. This value is
also used for projecting the yield.
86/109
Advertisement
Table of Contents
