Table of Contents
Advertisement
Installation and operating instructions
QX³ series
Item
1
2
3
Installing the inverter:
No.
1
2
3
4
5
6
4. Mounting the inverter
6. Attaching the ventilation grille
_____________________________________________________________________________________________
Q3 ENERGIE Installation and operating instructions QX³ series
Version 1.0, Stand 27.04.2015
DESCRIPTION
Wall mounting bracket
Schematic diagram of the housing
Lateral fixation (to prevent the device being lifting out accidentally)
Action
Use the wall mounting bracket as a drilling template to mark the positions of the drill
holes at the installation site.
Drill the holes
Screw the wall-mounting bracket to the intended subsurface with suitable mounting
material.
At least 2 persons should now hang the inverter on the prepared wall-mounting bracket.
The two persons should, for example, each carry the inverter with one hand in the
ventilation openings on its side and the other hand holding the device from underneath.
Fix the inverter on its left and right sides with screws (A) to prevent it being lifted out
accidentally.
Insert the ventilation grids on the left and on the right.
CAUTION
Check that the inverter is securely mounted!
5. Securing the wall bracket
27/109
Advertisement
Table of Contents
