Switch On The Inverter; Setting Up Communication And Accessories; Making The Connection To The Web Server Of The Inverter - Q3 ENERGIE QX3 Series Installation And Operating Instructions Manual

Installation and operating instructions
QX³ series
4.17

Switch on the inverter

Earthing the inverter:
No. Action
Switch on the power voltage (public grid) by switching on the specified power circuit breaker.
1 Once the supply voltage connection is made the communication electronics
are supplied and the device's display starts up.
2 Switch the DC disconnecter switch on the inverter to the position "ON"
If the PV field is connected and sufficient radiation is present, the inverter will start up when
4
the DC disconnecter switch is switched on.
If the inverter has not yet been configured and the Installation Assistant not completed, the
5a Installation Assistant will start up automatically, please refer here to Chapter 5.17
"Installation Assistant".
If the inverter has already been configured and the Commissioning Assistant successfully
5b
completed, feeding into the public grid will commence if there is sufficient radiation.
4.18

Setting up communication and accessories

Carry out all other settings via the display or the web server of the inverter.
NOTE
You can change all settings at any time, with the exception of the country settings.
4.19

Making the connection to the web server of the inverter

You can make the connection to the web server using your Internet browser.
Please check on the display of the inverter the IP address assigned by the DHCP
and make a note of this for subsequent use. Alternatively you can set the IP
address and the net mask manually on the display of the inverter. The DCHP client
must be deactivated for this.
To do this enter the IP address http://192.168.1.100 in the address line of the
Internet browser and acknowledge your entry. The website of your inverter will
now open. For more information, please read chapter 7 Operation and monitoring
via the web interface.
NOTE
The IP address could change if a new DHCP lease is allocated.
The IP address "192.168.1.100" is assumed for the inverter in the rest of these
Operating and Installation Instructions. This could deviate from the IP address
assigned by the DHCP.
_____________________________________________________________________________________________
Q3 ENERGIE Installation and operating instructions QX³ series
Version 1.0, Stand 27.04.2015
61/109