Installation and operating instructions
QX³ series
Tools needed:
Slotted-head screwdriver with 3 mm-wide blade
Materials needed:
+ PV plug-in connector
- PV plug-in connector
PV1-F solar cable
Design of DC plug-in connector +
Pos
1
2
3
4
5
Preparing the PV cable:
No.
1
_____________________________________________________________________________________________
Q3 ENERGIE Installation and operating instructions QX³ series
Version 1.0, Stand 27.04.2015
DESCRIPTION
Sleeve
Contact and clamping spring
Contact insert
Rubber seal
Cable gland
Action
Strip the cable back 15 mm. Take care while doing this not to cut off any single wires.
39/109