The functions and parameters of the settings
menu are explained here. Underlined items
are the factory setting.
Naming of transmitter
You can specify a transmitter name of up to
16 characters. The factory setting for the
transmitter name is the model name and
serial number. The transmitter name is sent
to the receiver as metadata and is used by
the receiver to distinguish between different
+: The first press on the + button displays
the character set. You can then use the + and
– buttons to select the desired character.
And then, pressing the SET button adds the
selected character to the end of the current
– : Deletes the last character in the current
SET: Enters the character or edited name.
You cannot insert or delete a character in
the middle of the name.
To edit with a keyboard
You can enter data from an optional
keyboard connected to the USB connector.
For details, see "Using a USB keyboard" on
Selecting the group/
The factory settings are as follows:
U3040: 00 3001 566.125MHz
U4250: 00 4201 638.125MHz
CE6267: 00 6201 798.125MHz
For details, see "Selecting the group/channel" on
Selecting the frequency
Matches the frequency range on this
transmitter to that of the Sony digital
The frequency range that can be set for the
optional receiver combined with this
transmitter differs as follows:
TV30-33, TV34-36, TV38-41
Not available for TV37
TV42-45, TV46-49, TV50-51
Not available for TV65 and TV66
For details about the frequency range of each band,
refer to "Sony Digital Wireless Microphone System
Frequency Lists" on the supplied CD-ROM.
The setting for this function cannot be
changed during actual signal transmission.
To change the setting, turn off the
transmitter first. Then, while holding down