Using Password Mode (Password) - Sony 3-873-945-12 (1) Operating Instructions Manual

USB cable (supplied)
USB adapter
cable
(supplied)
For details on receiver operations, refer to the
operating instructions supplied with the
receiver.
When you select REMOTE:
The transmitter searches for a receiver
that it has been paired with. After the
transmitter detects the receiver, the
transmitter exchanges the encryption
key with receiver and encrypted
transmission begins.
Using password mode
(PASSWORD)
Set this mode when multiple transmitters
are paired with multiple receivers for
encrypted transmission.
If both transmitters and receivers are set
with the same user-designated password,
the audio signal can be decoded. This mode
is useful when multiple transmitters and
receivers are used as a single group, or
when the audio signal from one transmitter
is received by multiple receivers at the same
time.
1
Hold down the SET button until the
item to be set flashes in the
ENCRYPTION indication on the
transmitter.
2
Press the + or – button repeatedly to
select PASSWORD, and then press the
SET button.
3
Input a password of up to eight
characters on the transmitter.
To enter a password, use the procedure
described in "Naming of transmitter (NAME)"
on page 32.
4
Set the encrypted transmission
function setting on the receiver to
PASSWORD.
5
Set the same password that was set on
the transmitter.
For details on receiver operations, refer to the
operating instructions supplied with the
receiver.
Note
It is recommended that you change the
password periodically.
Using the encrypted transmission function 29