Attaching The Hook And Loop Strip - StarTech.com WALLSTSI2 User Manual

Attaching the Hook-and-Loop Strip
The Hook-and-Loop Strip is designed to help hold the
Keyboard in place on the Keyboard Tray.
If necessary, cut the Hook-and-Loop Strip to fit the length
1.
of your keyboard.
Separate the two sides of the Hook-and-Loop Strip.
2.
Remove the backing from both of the Hook-and-Loop
3.
Strips and while applying pressure fix one strip to the top of
the Keyboard Tray and the other strip on the bottom of the
Keyboard, making sure to align the two strips.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
19