Table of Contents
Advertisement
Installing and removing QSFP+ transceiver modules
and cables
For information about installing and removing QSFP+ transceiver
modules and cables, see HPE Transceiver Modules and Network
Cables Installation Guide.
Verifying the installation
After the installation is complete, identify whether the interface module
is operating correctly.
If the interface module fails to operate correctly, perform the following
steps:
1. Reinstall it following the installation procedures described in this
document.
2. If the problem persists, contact Hewlett Packard Enterprise
Support.
▌Documentation
To access documentation and support services, go to the Hewlett
Packard Enterprise Support Center website:
www.hpe.com/support/hpesc
The information in this document is subject to change without notice.
© Copyright 2019 Hewlett Packard Enterprise Development LP
BOM: 3101A0JB
Version: 6PW104
5998-7152u
8
Advertisement
Table of Contents
