HPE JH182A User Manual page 4

Product
HPE description
code
HPE X240 40G QSFP+
JG328A QSFP+ 5m Direct Attach
Copper Cable
Table 5 40G QSFP+ to SFP+ cables available for the QSFP+ ports
Product
HPE description
code
HPE X240 40G QSFP+ to
JG329A 4x10G SFP+ 1m Direct
Attach Copper Splitter Cable
HPE X240 40G QSFP+ to
JG330A 4x10G SFP+ 3m Direct
Attach Copper Splitter Cable
HPE X240 40G QSFP+ to
4x10G SFP+ 5m Direct
JG331A
Attach Copper Splitter Cable
NOTE:
• When you install the interface module on the HPE FlexFabric
5930 4-Slot Switch (JH179A), HPE FlexFabric 5930 4-Slot
TAA Switch (JH188A), and HPE FlexFabric 5940 4-Slot Switch
(JH398A) the 40-GE QSFP+ ports on the interface modules
cannot be split into four 10-GE SFP+ ports.
• As a best practice, use HPE transceiver modules and cables
for the QSFP+ ports. The available transceiver modules and
cables might change over time. For the most recent list of
available transceiver modules and cables, contact Hewlett
Packard Enterprise Support or marketing staff.
For more information about HPE QSFP+ transceiver modules,
QSFP+ cables,
Comware-Based Devices Transceiver Modules User Guide.
and QSFP+
4
Cable length
5 m (16.40 ft)
Cable length Data rate
1 m (3.28 ft)
3 m (9.84 ft)
5 m (16.40 ft) 40 Gbps
to SFP+ cables,
Data rate
40 Gbps
40 Gbps
40 Gbps
see
HPE