Table of Contents
Advertisement
TOP LIGHT INSTALLATION
LIGHT ASSEMBLY
TOP LIGHT AND
SHELF LIGHT ASSEMBLY
ARE THE SAME ASSEMBLY
LIGHT ASSEMBLY
1. Turn the light switch to the off position.
2. Hang one end of light assembly housing on to top light hanger bracket located near ceiling in lower
case section at each end of case. Hook the other end of light assembly housing on to the top light hanger
bracket on the opposite end.
3. Remove the cap from the top light female sockets.
IMPORTANT: Grip each side of cap firmly and wiggle and pull cap straight out of socket. Do not roll
cap during removal. Incorrect removal of cap may cause damage to electrical connection.
RIGHT
4. If the socket is not being used for a shelf light, the cap must be plugged into socket for entire light
system to operate.
5. Plug in top light by aligning the male pins on the top light plug with the female top light socket and
push together. IMPORTANT: Do not roll plug during insertion.
.
TOP LIGHT HANGER
BRACKET
SHELF CORD PLASTIC
RETAINER CLIP
- 9 -
TOP LIGHT PLUG
SHELF LIGHT PLUG
WRONG
TOP LIGHT SOCKET
SHELF LIGHT SOCKET
Advertisement
Table of Contents
