Table of Contents
Advertisement
SECURITY NIGHT COVER (OPTION)
LOCK HANDLE
(SHOWN IN LOCK POSITION)
SECURITY NIGHT COVER
GRAB HANDLE
LOCK HANDLE CATCH
TOP GLASS HANDLE
"U" RATAINER CLIP
FRONT CLEAR DEFLECTOR
"U" RATAINER CLIP ON CENTER
(ON SOME MODELS)
REMOVAL:
1. Unlock the lock handles and turn handles vertical to disengage from lock handle catches.
2. Grab the front grab handles and lift the cover straight up out of the case opening.
INSTALATION:
1. Turn the lock handle so the latch handle is vertical to the top of the case.
2. Holding the grab handles place the bottom flange of the security night cover inside the "U"
retainer clips located on each side of case opening behind the front clear deflector. There
also may be a "U" retainer clip in the center of the case that must also engage the security
night cover flange.
3. Set the top flange of the security cover down against the top glass handle.
4. Turn the lock handles so they engage the lock handle catches and use the key to lock them
in place.
IMPORTANT: Cleaning the Acrylic plastic security night cover require special care to prevent hazing of
material. Lightly dust (not wipe) the surface with clean soft cloth. Then the surface can be wiped carefully
with a soft, wet cloth or chamois. The cloth or chamois must be kept free of grit by frequently rinsing in
clean water. Grease and oil can be removed with kerosene. Do not use window cleaners or kitchen scouring
compounds. DO NOT use solvents such as Acetone, Benzene, Carbon Tetrachloride, and Lacquer
Thinners. A spray wax such as Pledge or Maguire's polish can be applied and wiped with a clean soft cloth.
The wax tends to fill in and hide small scratches
LOCK HANDLE CATCH
"U" RATAINER CLIP
- 15 -
LOCK HANDLE
(SHOWN IN LOCK POSITION)
GRAB HANDLE
Advertisement
Table of Contents
