Table of Contents
Advertisement
Placing Product into Upper Food Pan Section of Case
1/4 PAN ADAPTER BAR 10.5"
FEDERAL #M19003-2
1/6 PAN ADAPTER BAR 7"
FEDERAL #M19003-3
- Determine Food pan arrangement and size requirements.
- Install food pans and place adapter bars provided between all pans. (There cannot be air gaps
between pans). See drawing above for typical arrangement.
- Above drawing shows a typical food pan arrangement. Any arrangement of Full, 1/2, 1/4, 1/3 or 1/6
size pans can be used provided sufficient adapters are used.
SSRSM5052 = (4) HALF PANS, SSRSM5952 = (5) HALF PANS, SSRSM7752 = (7) HALF PANS,
- A set of divider bars are supplied with each case. If additional adapters are required call to order
required adapters.
- Do not run case without all food pans and all adapters installed.
NOTICE:
NOTICE:
NOTICE:
LOWER SECTION OF CASE AND OTHER FOOD PANS WILL NOT HOLD PROPER
TEMPERATURE IF ALL PANS ARE NOT INSTALLED.
1/3 PAN
1/4 PAN
CASE MUST BE STOCKED WITH PRE-CHILLED PRODUCT ONLY.
This refrigerated display case is designed to operate
in a maximum environment of 75 DEG. F and 55% relative
humidity. Exceeding these limits will cause poor case
performance and sweating of glass panels.
DO NOT RUN CASE WITHOUT ALL FOOD PANS INSTALLED.
1/6 PAN
1/2 PAN
1/3 PAN
MAIN ADAPTER BAR 12.75"
FEDERAL #M19003-1
- 19 -
Advertisement
Table of Contents
