Table of Contents
Advertisement
SHELVING INSTALLATION & REMOVAL
Shelf Bracket & Supports Installation
SHELF LIGHT CORD
RETAINER CLIP
LIGHT ASSEMBLY
1. Turn the light switch to the off position.
2. Follow the instruction in the illustration below and insert (1) of the (2) shelf brackets in the desired
shelf standard slot on one side of the case. Place the additional shelf bracket in the same shelf standard
slot on the opposite end of case. The bracket with a shelf light cord retainer clip must be on the side
with the shelf light receptacle.
1. Place shelf bracket top hook into desired shelf
2. Lift shelf bracket top hook to allow shelf bracket
3. Swing shelf bracketbottom tab into shelf standard
4. Place the desired shelf bracket notch of 0, 6, or 12
3. Hang one end of shelf light housing on the front notch of a shelf bracket and then the other end of shelf
light housing on the notch of the shelf bracket on the opposite end.
NOTE: On models without shelf lights, use a shelf support instead of a shelf light housing.
4. Push shelf light cords into plastic shelf cord retainer clip located on inside of shelf bracket.
5. Remove the cap from the appropriate female light sockets.
IMPORTANT: Grip each side of cap firmly and wiggle and pull cap straight out of socket. Do not roll
cap during removal. Incorrect removal of cap may cause damage to electrical connection.
SHELF STANDARD
SHELF BRACKET
INSTALLATION
SHELF STANDARD
TOP HOOK
1
2
3
BOTTOM TAB
4
6 v NOTCH
0 v NOTCH
standard slot.
bottom tab to clear shelf standard slot.
slot.
degrees onto bottom of shelf standard slot.
SHELF STANDARD
RETAINING SCREW
REAR SHELF SUPPORT
LIGHT ASSEMBLY
SHELF BRACKET
1
3
1. Lift shelf bracket up to allow shelf bracket notch
to clear the bottom of shelf standard slot.
2. Swing shelf bracket bottom tab out of shelf
standard slot.
3. Drop shelf bracket down to allow shelf bracket top
hook to clear top of shelf standard slot.
4. remove shelf bracket top from shelf standard slot.
- 10 -
REAR SHELF SUPPORT
SHELF LIGHT CORD
RETAINER CLIP
REMOVAL
2
4
CLEAR BUMPER
TOWARDS END PANEL
Advertisement
Table of Contents
