For a quick inspection of the correct
aiming of the front light beam:
•
Place the vehicle 10 m (32.8 ft)
from a vertical wall and make
sure the ground is level.
•
Turn on the low beam light, sit
on the vehicle and check that
the light beam projected to the
wall is a little below the headlight
horizontal straight line (about
04_26
9/10 of the total height).
In order to carry out vertical adjust-
ment of the light beam:
•
Position the scooter on the level.
•
Adjust the inclination by turning
screws (1).
04_27
Voor een snelle controle van de correcte
richting van de voorste lichtbundel:
•
Plaats het voertuig op 10 m
(32.8 ft) van een verticale wand,
en controleer of de ondergrond
vlak is.
•
Ontsteek het dimlicht, ga op het
voertuig zitten en controleer of
de lichtbundel die op de wand
wordt geprojecteerd zich iets
onder de horizontale lijn van de
koplamp bevindt (ongeveer 9/10
van de totale hoogte).
Voor het uitvoeren van de verticale re-
geling van de lichtbundel:
•
Plaats het voertuig in de vertica-
le inrichting.
•
Regel de helling door te handel-
en op bout (1).
115