To Change From The Menu - Sony VPL-DX10 Operating Instructions Manual

The menu automatically goes off in
approximately 5 seconds after operation.

To Change from the Menu

INPUT NETWORK USB
1
MENU
ENTER
RESET
KEYSTONE
AUTO FOCUS LENS /TILT
D ZOOM VOLUME FREEZE
1
Press the MENU key.
The menu appears.
32
Correcting the Trapezoidal Distortion Automatically (Auto V Keystone Correction)
PUSH
ENTER
2~6
MENU
1
INPUT
LAMP/COVER
APA
2~6
PIC MUTING
AUDIO MUTING
2
Press the v/V key to select the
Installation setting menu then press
the B or ENTER key.
Lamp Mode
Direct Power ON
3
Select "V Keystone" with the v/V key
from the Installation setting menu then
press the ENTER key.
4
Select "Auto" for automatic
correction or "Manual" to correct it
manually. Then, press the ENTER
key.
5
If you selected "Manual", use the v/
V/b/B keys.
When the lower side is longer than
the upper side (
Adjust the volume to decrease it.
When the upper side is longer
than the lower side (
Adjust the volume to increase it.
6
Press the ENTER key.
Notes
• The auto V Keystone adjustment may not
correct the trapezoidal distortion perfectly,
depending on the room temperature or the
screen angle.
• Since the V keystone adjustment is an
electronic correction, sometimes the image
will be deteriorated.
Auto
Standard
Off
)
)