Menu - Sony KP-48V80 Operating Instructions Manual

Using the Audio Menu
!_ Audio
Treble J_
Bass
Balance
(_ MTS/SAP: Stereo
Auto Volume: On
IJ Effect: Trusurround
Speaker: On
Audio Out: Variable
SAVA SP Control
D
Move _. Select _ Exit
Sliders
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 29.
To select the Audio ./_ menu:
Display n_, Highlight J) IJb, Select
To restore the factory settings
Press RESET on the remote control while the
Audio menu is selected.
Treble Adjust slider right (up) to increase high pitched sounds.
Sound adjustment Adjust slider left (down) to decrease high pitched sounds.
Bass Adjust slider right (up) to increase low pitched sounds.
Sound adjustment Adjust slider left (down) to decrease low pitched sounds.
Balance Adjust slider right (up) to emphasize right speaker volume.
Sound adjustment Adjust slider left (down) to emphasize left speaker volume.
MTS/SAP
Enjoystereo,
bilingual and mono
programs.
Auto Volume
Adjust thesound
level
Effect
Customizes
surroundsound
effectsbased on the
program'saudio
type.
When the sound is intermittent due to poor reception conditions, select "Stereo"
or "SAP."
Stereo: Select for stereo reception when viewing a program broadcast in stereo.
SAP: Select to listen to a bilingual broadcast. (non-SAP programs will be muted
when this feature is selected)
Mono: Select for mono reception. (use to reduce noise during stereo broadcasts)
Auto SAP: Select to listen to SAP when a SAP program is broadcast and return
to stereo reception automatical_ for non-SAP programs.
MTS/SA
Quick MTS access: Press _ -- on the remote control to cycle through the
"MTS/SAP" options as follows: Stereo --* SAP --, Mono --, Auto SAP.
On: Sound output coming from TV speakers have the volume level equalized for all
channel audio inputs when broadcasts have different sound transmission levels.
Off: Sound output coming from the "IV speakers varies according to the received
channel.
"Effect" can only be set when "Speaker" is set to "On" or "Off."
Truaurround: Produces a virtual surround effect for Dolby-surround encoded
programs.
Simulated- Adds a surround-like effect to mono programs.
Off: Normal stereo or mono reception.
Quick Effect access: Press 0 on the remote control to cycle through the
"Effect" options as follows: Trusurround --* Simulated--_ Effect Off,
(continued)
31