The Installation Menu - Sony VPL-DX10 Operating Instructions Manual

The Installation Menu

The Installation menu is used for changing the settings of the projector.
Lamp Mode
Direct Power ON
Setting items
V Keystone
Image Flip
Lamp Mode
Direct Power On Set to "On" if you are using a circuit breaker to turn the
Notes
• Since the V keystone adjustment is an electronic correction, sometimes the image will be
deteriorated.
• When the Lamp Mode is set to "High", the sound from the fan to cool the lamp, etc. is often
excessive.
54
The Installation Menu
Auto
Standard
Off
Functions
Sets Auto V Keystone correction.
• Auto: For Auto V Keystone correction to be active
• Manual: For Auto V Keystone correction to be inactive
For details, see "Correcting the Trapezoidal Distortion
Automatically (Auto V Keystone Correction)" on page
31.
Flips the picture on the screen horizontally and/or
vertically.
Use this item for installation for rear projection.
• HV: Flips the picture horizontally and vertically.
• H: Flips the picture horizontally.
• V: Flips the picture vertically.
• Off: The picture does not flip.
Sets the lamp brightness used during the projection.
• High: For the projected image to be brighter than
Standard
Select this when ambient lighting is too bright to view the
display clearly.
• Standard: For the projected image in standard brightness
power on/off the entire system.
You can turn the power on/off without pressing the ?/1
key.
Initial setting
Auto
Off
Standard
Off