To Return The Value Of An Adjusted Item To Default; Correcting The Trapezoidal Distortion Automatically (Auto V Keystone Correction); Further Adjusting An Image That Has Been Automatically Adjusted - Sony VPL-DX10 Operating Instructions Manual

2
Press the v/V key to select the Picture
menu then press the B or ENTER key.
3
Select "Reset" with the v/V key from
the Picture menu then press the
ENTER key.
For details, see to page 45.
4
After the next window has appeared,
select "Yes", using the b/B key, then
press the ENTER key.
Reset
Do you wish to reset the settings
to default values ?
Yes
Factory-preset items:
"Contrast," "Brightness," "Color,"
"Hue," "Color Temp.," "Sharpness,"
"DDE," "Black Level Adj.," and
"Gamma Mode" (can be set on Picture
menu).
To Return the Value of an
Adjusted Item to Default
Press the RESET key on the Remote
Commander.
If you press the RESET key while the item is
being adjusted (the item is displayed in the
window), it returns to the factory preset
value.

Correcting the Trapezoidal Distortion Automatically (Auto V Keystone Correction)

No
Correcting the
Trapezoidal
Distortion
Automatically (Auto
V Keystone
Correction)
This function automatically corrects
trapezoidal distortion due to the projection
angle.
Further Adjusting an Image
That Has Been Automatically
Adjusted
Note
If you wish to switch to auto adjustment
mode after adjusting manually, switch the V
Keystone setting to "Manual" once then
return it to "Auto".
INPUT NETWORK USB
MENU
ENTER
RESET
KEYSTONE
AUTO FOCUS LENS
/TILT
D ZOOM VOLUME FREEZE
1
Press the KEYSTONE/TILT key.
Correction menu appears.
2
Adjust v/V/b/B with the v/V/b/B
keys.
When the lower side is longer than
the upper side (
Adjust the volume so as to decrease it.
When the upper side is longer
than the lower side (
Adjust the volume so as to increase it.
APA
2
1
PIC MUTING
AUDIO MUTING
)
)
31