Sony VPL-DX10 Operating Instructions Manual page 46

Setting items
Color Temp.
Sharpness
DDE (Dynamic
Detail
Enhancer)
Black Level
Adj. (Adjust)
Gamma Mode
Notes
• When the "Picture Mode" is set to "Presentation", the setting item of "Color Temp." is not
displayed.
• For Picture Mode, a part of the setting items cannot be displayed on the screen according to the
input signal.
• The Picture Mode setting is common between Network and USB. (VPL-DX15 only)
46
The Picture Menu
Functions
Adjusts the color temperature.
• High: Gives white colors a blue tint.
• Low: Gives white colors a red tint.
Adjusts the sharpness of the image.
The higher the setting, the sharper the picture. The lower
the setting, the softer the picture, thus reducing the noise.
According to the film source you have selected, make a
setting for playback.
• Film: Normally, select this option. Reproduces the 2-3
Pull-Down film sources with smooth picture movement.
When the video signal with a format other than the 2-3
Pull-Down is input, "Progressive" is automatically
selected.
• Progressive: Converts an interlace format video signal to
a progressive format.
• Off: Plays a video signal in an interlace format without
converting.
Dark parts will be clear.
Set according to the input signal source.
• High: Gives higher emphasis to the black color.
• Low: Gives lower emphasis to the black color.
• Off: Cancels this feature.
Selects a gamma correction curve.
• Graphics: Improves the reproduction of halftones.
Photos can be reproduced in natural tones.
• Text: Contrasts black and white. Suitable for images that
contain lots of text.
Initial setting
Low
30
Film
Off
Graphics