After Use; Cleaning; Housing - Silvercrest SDMF 1300 A1 Operating Instructions And Safety Instructions

After use

1) Once you have finished using the appliance, press the On/Off switch
again to switch it off. The blue LED
the appliance from the power supply.
2) Before putting the appliance away, allow it to cool down completely. Empty
the water tank
NOTE
► The appliance automatically switches to standby mode after 15 minutes if
it is not used during this time (auto-off function). The red LED
standby mode.

Cleaning

Housing

WARNING – RISK OF ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect the power plug from the power
socket. Otherwise, there is a risk of electrocution.
WARNING – RISK OF INJURY!
► Before cleaning the appliance, always remove the plug from the socket
and allow the appliance to cool down completely. Otherwise, there is a
risk of burns.
CAUTION – PROPERTY DAMAGE!
► Do not use abrasive, aggressive or chemical cleaning agents. They
can damage the surface and also lead to irreparable damage to the
appliance.
Clean the housing and the steam head
moistened with water.
After cleaning, allow the housing to dry completely before using the
appliance again.
SDMF 1300 A1
after each use.
goes out. You can now disconnect
only with a soft cloth lightly
GB │ IE │ NI │ CY
flashes in
│
11 ■