Steaming With The Clothes Brush - Silvercrest SDMF 1300 A1 Operating Instructions And Safety Instructions

4) Release the steam button
head

Steaming with the clothes brush

1) Before switching on the appliance, place the clothes brush
head
head
clicks into place.
C
2) Switch the appliance on.
3) Hang the item to be ironed on a coat hanger and pull it taut with one hand.
Steam the garment evenly from top to bottom.
4) Slowly brush the section of the fabric from top to bottom. Do not apply a lot of
pressure. The combination of steam and the clothes brush
all wrinkles.
5) Turn off the appliance by pressing the On/Off switch
from the power socket and allow the appliance to cool down completely.
6) To remove the clothes brush
on the underside of the clothes brush
clothes brush
D
■ 10 │ GB │ IE │ NI │ CY
. The appliance will need to heat up again.
, making sure that the large wing is on the underside of the steam
(fig. C). Push the clothes brush
detaches from the steam head
as soon as water drips from the steam
onto the steam head
from the steam head
forward with your thumb until the
(figs. D and E).
E
on the steam
until it
gently removes
. Remove the plug
, slide the large wing
SDMF 1300 A1