Translation Of The Original Ec Declaration Of Conformity - Parkside PWSA 18 A1 Translation Of The Original Instructions

GB
IE
We hereby confirm that the
Cordless Angle Grinder
Design Series PWSA 18 A1
Serial Number
201502000001 - 201503040000
conforms with the following applicable relevant version of the EU guidelines :
2006/42/EC • 2004/108/EC • 2006/95/EC • 2011/65/EU*
In order to guarantee consistency, the following harmonised standards as well as national
standards and stipulations have been applied:
EN 60335-1:2012 • EN 62233:2008 • EN 60335-2-29/A2:2010
This declaration of conformity (15)** is issued under the sole responsibility of the
manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany
25.03.2015
*The object of the declaration described above satisfies the provisions of Directive 2011/65/EU
of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful
substances in electrical and electronic appliances.
**The last two digits of the year in which the CE marking was affixed.
EN 60745-1/A11:2010 • EN 60745-2-3/A2:2013
EN 55014-1/A2:2011 • EN 55014-2/A2:2008
EN 61000-3-2/A2:2009 • EN 61000-3-3:2013
Translation of the original EC
declaration of conformity
Documentation Representative
Volker Lappas
75