Translation Of The Original Ec Declaration Of Conformity - Parkside PWS 125 B2 Translation Of The Original Instructions

GB
MT
We hereby confirm that the
Angle Grinder
Design Series PWS 125 B2
Serial Number
201507000001 - 201507134600
conforms with the following applicable relevant version of the EU guidelines :
2006/42/EC • 2004/108/EC • 2006/95/EC • 2011/65/EU*
In order to guarantee consistency, the following harmonised standards as well as national
standards and stipulations have been applied:
EN 60745-1/A11:2010 • EN 60745-2-3/A2:2013
EN 55014-1/A2:2011 • EN 55014-2/A2:2008
EN 61000-3-2/A2:2009 • EN 61000-3-3:2013
This declaration of conformity (15)** is issued under the sole responsibility of the
manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany
05.08.2015
* The object of the declaration described above satisfies the provisions of Directive
2011/65/EU of the European Parliament and the Council of 8 June 2011 on limiting
the use of certain harmful substances in electrical and electronic appliances.
** The last two digits of the year in which the CE marking was affixed.
106
Translation of the original EC
declaration of conformity
Volker Lappas
Documentation Representative