Connecting The Projector; Connecting With A Computer - Sony VPL-CS7 Operating Instructions Manual

Connecting the
Projector
When you connect the projector,
make sure to:
• Turn off all equipment before making any
connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; loose
connections may increase noise and
reduce performance of picture signals.
When pulling out a cable, be sure to pull it
out from the plug, not the cable itself

Connecting with a Computer

This section describes how to connect the
projector to a computer.
For more information, refer to the
computer's instruction manual.
To connect a computer
Ex. VPL-CS7
Left side
AUDIO VIDEO
S VIDEO INPUT A
MONITOR OUT
2
to audio
output
Computer
1HD D-sub 15-pin cable (supplied)
2Stereo audio connecting cable (not supplied)
(Use a no-resistance cable)
Notes
• The projector accepts VGA, SVGA, XGA
signals. However, we recommend that you
set the output mode of your computer to
SVGA mode for the external monitor.
• If you set your computer, such as a notebook
type, to output the signal to both your
computer's display and the external monitor,
the picture of the external monitor may not
appear properly. Set your computer to output
the signal to only the external monitor.
For details, refer to the computer's
operating instructions supplied with your
computer.

Connecting the Projector

1
to monitor
output
17