Other Functions; Off & Go Function; Only) - Sony VPL-CS7 Operating Instructions Manual

To cancel the security lock
1
Press the MENU key, then turn off the
"Security Lock" setting in the
INSTALL SETTING menu.
2
Enter the password.
Enter the password that was set.
Note
If you call the customer service center because
you have forgotten the password, you will need
to be able to verify the projector's serial
number and your identity. (This process may
differ in other countries.) Once your identity
has been confirmed, we will provide you with
the password.

Other Functions

Off & Go Function (VPL-CS7

only)

If you are leaving the conference room
immediately, turn the projector off, the
powered tilt adjuster is put away in the
projector, and then, after the lens protector
closes, you can unplug the AC power cord.
After the AC power cord is unplugged, the
fan runs for a certain time automatically.
Notes
• When unplugging the AC power cord, ensure
that the powered tilt adjuster is put away in
the projector and the lens protector closes.
Moving the projector with the powered tilt
adjuster raised may damage the adjuster.
• Turn off the projector according to the
procedure in "Turning off the power", then
cool it down when storing the projector in the
carrying case.
• However, if the unit has been on for less than
15 minutes, the fan might not begin to turn as
a result of inadequate charging. In that case,
follow the procedure for turning off the
power as described in "Turning Off the
Power" on page 21.
25
Other Functions