Location And Function Of Controls; Top/Front/Left Side; Rear/Right Side/Bottom - Sony VPL-CS7 Operating Instructions Manual

Location and
Function of Controls

Top/Front/Left Side

Rear/Right Side/Bottom

4
5
6
7
8
9
1 Control panel
For details, see "Control Panel" on
page 12.
2 Lens protector (lens cover)
The lens protector automatically opens
when the power is turned on.
3 Ventilation holes (exhaust)
4 Remote control detector
5 Adjuster (hind pad)
Turn the adjuster to the right or left for
minor tilt adjustment of the projected
picture.
6 Ventilation holes (intake)/Lamp
cover
7 Ventilation holes (intake)/air
filter cover
Notes
• Do not place anything near the
ventilation holes as it may cause
internal heat build-up.
• Do not place your hand or objects
near the ventilation holes as it may
cause the air coming out heat build-
up.
• To maintain optimal performance, clean
the air filter every 500 hours.
For details, see "Cleaning the Air
Filter" on page 42.
8 Ventilation holes (intake)
9 Powered tilt adjuster
0 Indicators
0
POWER SAVING
Lights up when the projector is in power
saving mode.
qa
TEMP (Temperature)/FAN
qs Lights up or flashes under the following
conditions:
qd
– Lights up when temperature inside the
projector becomes unusually high.
qf
– Flashes when the fan is broken.
qg
LAMP/COVER
Lights up or flashes under the following
conditions:
– Lights up when the lamp has reached
the end of its life or becomes a high
temperature.
– Flashes when the lamp cover is not
secured firmly.
For details, see pages 34, 45.
qa Focus ring
Adjusts the picture focus.
qs Zoom ring
Adjusts the picture size.

Location and Function of Controls

11