General Information; Preparing To Use The Outdoor Sensor - Auriol 284995 Operation And Safety Notes

General information

position the devices, make sure that they
are not exposed to direct sunlight, vibra-
tions, dust, heat, cold or moisture. Do not
place the devices near heat sources, e.g.
radiators, to prevent damage to the de-
vice.
Please ensure that neighboring devices
are not operated at the same frequency
of 433 MHz. These types of devices may
interfere with the radio connection.
Do not place the devices next to or on
metal plates. Otherwise the quality of ra-
dio wave transmission may be reduced.
Radio signal (WWVB):
The WWVB-Signal (time signal transmitter) is
made up of time pulses transmitted from one
of the highest precision clocks in the world
close to Fort Collins, Colorado.
Preparing to use the
outdoor sensor
Remove the battery cover from the back
of the outdoor sensor.
Remove the battery insulation strip.
The outdoor sensor is now ready for use
and the control LED
Close the battery cover.
If this does not work, if necessary restart
the temperature station. To do this, press
When choosing where to
illuminates briefly.
29
US-EN 15