Wiznet WIZ610io User Manual page 3

1. Introduction
WIZ610io is the internet offload network module that includes W6100 (TCP/IP
hardwired chip, include PHY), MAG-JACK (RJ45 with X'FMR) with other glue logics.
It can be used as a component and no effort is required to interface W6100 and
Transformer.
The WIZ610io is an ideal option for users who want to develop their Internet
enabling systems rapidly.
For the detailed information on implementation of Hardware TCP/IP, refer
to the W6100 Datasheet.
WIZ610io consists of W6100 and MAG-JACK.
TCP/IP, Ethernet MAC : W6100
⚫
Ethernet PHY : Included in W6100
⚫
Connector : MAG-JACK(RJ45 with Transformer)
⚫
1.1 Feature
Support Hardwired TCP/IP Protocols : TCP, UDP, IPv6, IPv4, ICMPv6,
⚫
ICMPv4, IGMP, MLDv1, ARP, PPPoE
Support IPv4/IPv6 Dual Stack
⚫
Support 8 independent SOCKETs simultaneously with 32KB Memory
⚫
Support SOCKET-less Command:
⚫
ARP, PING, ICMPv6(PING, ARP,DAD,NA,RS) Command for IPv6 Auto-
configuration& Network Monitoring
Support Ethernet Power Down Mode & Main Clock Switching for power save
⚫
Support Wake on LAN over UDP
⚫
Support Serial Interface: High Speed SPI(MODE 0/3)
⚫
Internal 16Kbytes Memory for TX/ RX Buffers
⚫
10BaseT/100BaseTX Ethernet PHY Integrated
⚫
Support Auto Negotiation (Full and half duplex, 10 and 100-based )
⚫
Support Auto-MDIX only on Auto-Negotiation Mode
⚫
3V operation with 5V I/O signal tolerance
⚫
Network Indicator LEDs (Full/Half Duplex, Link, 10/100 Speed, Active)
⚫
Interfaces with two 2.54mm pitch 1 x 10 header pin
⚫
Temperature : -40 ~ 85℃(Operating)
⚫
WIZ610io User Manual (WIZnet Co.,Ltd.)
3