Disposal Of Packaging Materials; Power Supply: Receiver; Inserting/Replacing The Batteries - Silvercrest SFS 52 B2 Operating Instructions Manual

Disposal of packaging materials

The packaging protects the appliance from damage
during transport. The packaging materials have
been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable.
Dispose of packaging materials that are no longer
needed in accordance with applicable local regu-
lations.

Power supply: receiver

The receiver is plugged into a properly installed
mains power outlet and does not require batteries.

Inserting/replacing the batteries

♦ Open the battery compartment
a coin into the slot and turning the battery com-
partment cover
the cover must point to the open lock symbol
(see fig. 1).
♦ Insert a CR2032 battery into the battery com-
partment
upwards (see fig. 2).
SFS 52 B2
Returning the packaging into the material
cycle conserves raw materials and
reduces the amount of waste generated.
anticlockwise. The arrow on
. The positive terminal should face
GB │ IE │ NI │ CY
by inserting
│
11 ■