Disposal Of Packaging Materials; Charging The Power Bank - Silvercrest SPBW 3000 A1 Operating Instructions Manual

Disposal of packaging materials

The packaging protects the device from
disposal, and are therefore recyclable.
Returning the packaging into the material cycle con-
serves raw materials and reduces the amount of
waste generated. Dispose of packaging materials
that are no longer needed in accordance with
applicable local regulations.

Charging the Power Bank

Before using the Power Bank, the integrated battery
must be fully charged.
CAUTION
► The Power Bank must never be charged and
used for charging an external device at the
same time.
► Due to the high battery capacity and bearing
in mind the charging time, the power bank must
be charged using a USB mains adapter.
► Use only a USB mains adapter with an output
voltage of 5 V and an output current of at least
2.1 A to charge the power bank.
SPBW 3000 A1
damage during transport. The packaging
materials have been selected for their
environmental friendliness and ease of
GB │ IE │
35 ■