Disposal Of Packaging Materials; Power Supply Receiver; Inserting/Replacing The Batteries - Silvercrest SFS 52 B2 Instructions Manual

■
_289974_SFSS2B2_LB9.indb 12

Disposal of packaging materials

The packaging protects the appliance from
damage during transport . The packaging
materials have been selected for their environ-
mental friendliness and ease of disposal, and
are therefore recyclable .
Returning the packaging into the
material cycle conserves raw materials
and reduces the amount of waste
generated .
Dispose of packaging materials that are no
longer needed in accordance with applicable
local regulations .

Power supply receiver

The receiver must be plugged into a properly
installed power socket and does not require
batteries .

Inserting/replacing the batteries

Open the battery compartment 9 by
♦
inserting a coin into the slot and turning the
battery compartment cover 0 counterclock-
wise . The arrow on the lid must point to the
open lock symbol
12 │ US - EN
(see Fig . 1) .
SFS 52 B2
25.08.17 09:3