FLORABEST FRM 1200 D3 Translation Of The Original Instructions page 24

GB IE
away from the ejection hole at
all times.
Caution! Danger! The blade
continues to run after switch-
ing off.
There is a risk of injury.
• The equipment is not to be lifted
or transported while the motor
is running. Switch off the equip-
ment if it has to be tilted in tran-
sit, when crossing surfaces other
than grass, and when the equip-
ment is being transported to and
from the surfaces to be mowed.
• Always keep the grass ejection
hole clean and clear. Remove
cut material only when the
equipment is stopped.
• Do not leave the equipment un-
attended in the workplace.
• Do not work with equipment that
is damaged, incomplete, or has
been modified without the author-
isation of the manufacturer. Do
not use the equipment with dam-
aged safety devices or screens
or with missing safety equipment
such as deflection and/or grass
collection devices.
• Do not overload the equipment.
Work only within the speci-
fied power range and do not
change the regulator settings on
the motor. Do not use low-pow-
ered machines for heavy work.
Do not use your equipment for
purposes other than those for
which it is designed.
• Do not use the equipment near
inflammable liquids or gases.
Non-observance will result in a
risk of fire or explosion.
24
• Do not lift or carry the equip-
ment when the motor is running.
• Switch off the equipment and
disconnect the plug. Make
sure that all moving parts have
come to a complete stop:
- Whenever you leave the ma-
chine,
- Before cleaning the
tion hole or removing block-
ages,
- When the equipment is out of
use,
- Before checking, cleaning or
working on the equipment,
- If the power cable is dam-
aged or frayed,
- If the equipment has hit a
foreign object or if strange
vibrations occur during work.
In this case, check the equip-
ment for damage and have it
repaired if applicable.
Make sure that all nuts, bolts
and screws are properly tigh-
tened.
• Do not place feet or hands near
or under rotating parts. Do not
stand in front of the grass ejec-
tion hole during sickle mowing.
• Do not run the engine if you are
facing the chute.
Maintenance and Storage:
• Ensure that all nuts, bolts and
screws are tightened firmly and
the equipment is in safe work-
ing condition.
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so.
Any work not specified in these
instructions is to be carried out
only by customer service centres
ejec-