BMW S 1000RR Rider's Manual page 97

Bluetooth connections can
be established, managed and
deleted in the CONNECTIONS
menu. The following Bluetooth
connections are displayed:
Mobile device
Rider's helmet
Passenger helm.
The connection status for mobile
end devices is displayed.
Connect mobile end
device
Pairing ( 94).
Activate the mobile end
device's Bluetooth function
(see mobile end device's
operating instructions).
Select Mobile device and
confirm.
Select Pair new mobile
device and confirm.
Mobile end devices are being
searched for.
The Bluetooth symbol
flashes in the bottom status
line during pairing.
Mobile end devices found are
displayed.
Select and confirm mobile end
device.
Follow the instructions on the
mobile end device.
Confirm that the code
matches.
The connection is established
and the connection status up-
dated.
If the connection is not
established, consult the
troubleshooting chart in the
section entitled "Technical
data". ( 225)
Depending on the mobile end
device, telephone data is trans-
ferred to the vehicle automatic-
ally.
Telephone data ( 103)
If the telephone book is
not displayed, consult the
troubleshooting chart in the
section entitled "Technical
data". ( 226)
If the Bluetooth connection is
not working as expected, con-
sult the troubleshooting chart
in the section entitled "Tech-
nical data". ( 225)
Connect rider's and
passenger's helmet
Pairing ( 94).
Select Rider's helmet or
Passenger helm. and con-
firm.
Make the helmet's communica-
tion system visible.
Select PAIRING NEW HEL-
METS or PAIRING NEW PASS.
HELM. and confirm.
Helmets are searched for.
5
95
z