BMW S 1000RR Rider's Manual page 151

chafe points using adhesive
tape.
NOTICE
Use the M Cover Kit from
BMW Motorrad to cover the
resulting bolt holes and re-
establish fastening.
Position air inlet flap 1 and clip
in at the top 2.
Position windscreen in the dir-
ection of arrow.
Install bolts 1 and 2.
Install mirror
Place the motorcycle on its
stand on firm, even ground.
Remove trim panel mounting.
Remove screws 1 and 2.
Remove windscreen in the dir-
ection of arrow.
Unclip air inlet flap at the top
in the direction of arrow and
remove downwards.
8
149
z