General Instructions; Toolkit - BMW S 1000RR Rider's Manual

General instructions

10
The "Maintenance" chapter de-
scribes straightforward proced-
176
ures for checking and replacing
certain wear parts.
Special tightening torques are lis-
ted as applicable. The tightening
torques for the threaded fasten-
ers on your vehicle are listed in
the section entitled "Technical
data".
You will find information on more
extensive maintenance and repair
z
work in the Repair Manual on
DVD for your vehicle, which is
available from your authorised
BMW Motorrad Retailer.
Some of the work calls for spe-
cial tools and a thorough know-
ledge of the technology involved.
If you are in doubt, consult a
specialist workshop, preferably
your authorised BMW Motorrad
Retailer.

Toolkit

1 Lever
without Dynamic Damp-
ing Control (DDC)
Adjusting spring preload
for rear wheel (
with Race package
or
with M Package
Adjusting riding height
at the traction strut
( 115).
2 Open-ended spanner
Width across flats 10/13
Removing battery
( 205).
2 Adjusting spring preload
for front wheel (
with Dynamic Damping
Control (DDC)
Adjusting spring preload
for rear wheel (
3 Reversible screwdriver
blade
Slotted bit and Torx T25
Removing and installing
trim panel components.
Removing front seat
(
OE
without Dynamic Damp-
ing Control (DDC)
109).
Adjusting compression-
OE
stage damping for front
wheel (
OE
without Dynamic Damp-
ing Control (DDC)
Adjust the rebound-
stage damping for front
wheel (
108).
OE
110).
81).
OE
111).
OE
112).