BMW S 1000RR Rider's Manual page 119

order to set the desired posi-
tion.
Install fixing screw 1.
Positioning of the
swinging arm pivot point
bush in the main frame, right
5 Nm
Turn left bush 2, alternately
along with right bush, by a
maximum of 90° respectively
in order to set the desired pos-
ition.
Ensure that the left 2 and right
bushes are fixed in the same
position (mark).
Install fixing screw 1.
Positioning of the
swinging arm pivot point
bush in the main frame, left
8 Nm
Install nut 1 and tighten with
appropriate torque.
Nut for swinging arm
pivot point bush on
frame
Thread-locking compound:
Loctite 270, High strength
50 Nm
Install nut 2 with washer 1 and
tighten with specified torque;
counter-hold the swinging arm
axle while doing so.
Nut on swinging arm axle
Thread-locking compound:
mechanical
100 Nm
Remove the engine lifter.
After changing the swinging
arm pivot point, the riding
height must be corrected at
the traction strut.
6
117
z