Advertisement
8. Can I connect ComPack to a powered beltpack line?
Yes, the ComPack has a DC blocking cap so it will not be damaged if
connected to a powered line, although DC power is not necessary for
operation. You must switch the Male XLR Function switch to <Com Link> for
proper operation.
9. I've lost the power supply for my ComPack. I have another
power supply that fits from a different product. Can I use
this instead?
No! Never use a power supply other than the one that was supplied by your
manufacturer. Power supplies are available in either AC or DC output with
many combinations of voltage and available current. Most consumer power
supplies are not regulated. This could invariably damage your equipment, and
also create a great deal of noise. Our products are designed for and tested
with their respective power supplies for optimum operation. If you have lost
your power supply, please contact your JK Audio dealer or our Customer
Service department and ask for a power supply for your ComPack.
FAQs
9
FAQs
Advertisement
Need help?
Do you have a question about the ComPack and is the answer not in the manual?
Questions and answers