Download
Share
Print this page
JK Audio BlueDriver-M3 Connect Applications
  1. Manuals
  2. Brands
  3. JK Audio Manuals
  4. Recording Equipment
  5. BlueDriver-M3
  6. Connect applications

JK Audio BlueDriver-M3 Connect Applications

Wireless audio interface
Hide thumbs Also See for BlueDriver-M3:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
BlueDriver-M3
Wireless Audio Interface
1.
Take Calls During a Live Event or Remote Broadcast
2.
Receive A2DP Audio From your Bluetooth Device
3.
Send A2DP Audio to your Bluetooth Device
4.
Bluetooth Headset as a Talkback Intercom
© 2018, JK Audio, Inc.
1311 E. 6th St. Sandwich, IL. 60548
™
800.552.8346 • 815.786.2929
Se Habla Español
jkaudio.com
info@jkaudio.com
Connect Applications
JK Audio

Advertisement

loading
Need help?

Need help?

Do you have a question about the BlueDriver-M3 and is the answer not in the manual?

Questions and answers

Related Manuals for JK Audio BlueDriver-M3

Summary of Contents for JK Audio BlueDriver-M3

  • Page 1 Receive A2DP Audio From your Bluetooth Device Send A2DP Audio to your Bluetooth Device Bluetooth Headset as a Talkback Intercom JK Audio © 2018, JK Audio, Inc. 800.552.8346 • 815.786.2929 jkaudio.com 1311 E. 6th St. Sandwich, IL. 60548 Se Habla Español...
  • Page 2 Switch to <Phone>. BlueDriver allows you to connect a line output or headphone output of 2. Simply plug BlueDriver-M3 into any your mixer to the <Send> jack on the mic level input of your mixer or console BlueDriver-M3. This signal goes back and pair to a cell phone.
  • Page 3 Headset Phone 1. While BlueDriver is off, set the Role Select Switch to <Phone>. 2. Simply plug BlueDriver-M3 into any mic level input of your mixer or console and pair to your Bluetooth device. 3. Stream full-bandwidth A2DP audio from your Bluetooth device.
  • Page 4 <Send> mini jack on your not have a live mic or interactive conversation. BlueDriver-M3 and the line level or A2DP is a one-way transmission, with nothing headphone output jack of your audio coming back on the return channel.
  • Page 5 BlueDriver allows you to connect an aux output of your mixer to the <Send> jack on 1. While BlueDriver is off, set the Role Select the BlueDriver-M3. This signal goes back to Switch to <Headset>. the headset, so make sure you don’t send your voice back to yourself.
  • Page 6 Aux or FX control to minimum. All other input channel Aux controls should be INPUT LEVEL at their desired settings for the “Mix-Minus” PRESETS feed returning to the BlueDriver-M3 ™ MUTE 2. Connect the FX Send output to the Send input on the BlueDriver-M3 .